Point Gas Detection for Refrigerant Leak Detection

For wide-ranging gas-monitoring needs, the economical Z-Gard C 485 Controllers are up to the task. The controllers connect with a wide array of MSA Z-Gard S Sensors, with controller models accepting up to 24 sensors. Relay outputs indicate warning, alarm or sensor fail for each zone, and units are available with one or two zones. A large LED readout displays the active channel and the corresponding sensor gas level.

Technical Specifications

A cost-efficient monitor for underground garages and ventilation control, the Z-Gard COmbo Gas Monitor uses an electrochemical sensor to detect carbon monoxide. The unit features local audio/visual alarm status indicators and it can be configured to interface with air-handling equipment to control air quality within a building. Additional remote sensors can be attached to the unit via the RS-485 network port, while a 4-20 mA output is proportional to the calibrated operating range.

Technical Specifications

The Z-Gard DS Sensor is designed to detect the presence of carbon monoxide and nitrogen dioxide gases in parking garages, vehicle storage areas or wherever else these two toxic gases could be found. These sensors employ electrochemical sensors which generate a representative output signal proportional to the calibrated operating range. All Z-Gard DS Sensors are available with 2 output versions, a 4-20mA analog output, or an addressable RS-485 digital signal.

Technical Specifications

The Z-Gard S Sensor is designed to detect the presence of carbon monoxide and nitrogen dioxide gases in parking garages, vehicle storage areas or wherever else these two toxic gases could be found. These sensors employ electrochemical sensors which generate a representative output signal proportional to the calibrated operating range. All Z-Gard S Sensors are available with 2 output versions, a 4-20mA analog output, or an addressable RS-485 digital signal. Z-Gard Sensors with RS-485 digital output are specifically designed to operate as a system with any Z-Gard CXII or C 485 Controller. Z-Gard Sensors with 4-20mA can be installed as stand-alone sensors typically integrated with the Z-Gard C Controller, or common commercial equipment including PLC, DCS, or building automation systems.

Technical Specifications

Gas Detection for CFC, HFC, HCFC and HFO refrigerants. Bacharach's MGS-250 Infrared Refrigerant Gas Detector is the leader in performance and flexibility. It can be configured as either a broadband sensor used for gross leak detection, or as a gas-specific version that's pre-calibrated and characterized for precision response to individual refrigerants.

Application for MGS-400 Series of gas detectors and controllers. The Bacharach MGS-400 App allows users to configure, maintain and interface with compatible MGS-400 series of gas detectors. Once a Bluetooth connection has been established, the app replaces the need for specialty training/tools.

Entrance monitor for improving safety in commercial and industrial applications. The MSA Bacharach® MGS-401 Entrance Monitor centralizes the status of up to four (4) MSA Bacharach diffusion Gas Detectors, which in turn provides an audible and visual alarm outside a monitored space.

2-Channel controller for refrigerant, toxic and combustible gas detection. Bacharach's MGS-402 Gas Detection Controller centralizes the status of up to two gas detectors, provides a complete package for your safety compliance application.

8-Channel controller for refrigerant, toxic and combustible gas detection. Bacharach's MGS-408 Gas Detection Controller centralizes the status of up to 8 gas detection channels in a single location. The digital display provides a real-time view of the gas concentration and status at each gas detection point.

Safety gas detection for refrigerants, toxic and combustible gases. Bacharach's MGS-410 Gas Detector makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation.

Used for detection of refrigerants, toxic and combustible gases. Bacharach's MGS-450 Gas Detector makes compliance with refrigeration safety codes (ASHRAE 15, EN 378, CSA-B52) simple and effective, saving time and money on equipment and installation.

Safely detect for refrigerants, toxic and combustible gases. Bacharach's MGS-460 Gas Detector makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation.

Gas detector for refrigerants, toxic and combustible gases. Bacharach's advanced MGS-550 Dual Gas Detector can utilize any combination of sensor technologies, including electrochemical, semiconductor (MOS), catalytic bead or infrared, in a single platform for unparalleled detection capability.