Continuous Emissions Monitoring Systems

Optimum Combustion Reduces your Fuel Bill. This helps the whole world and future generations by reducing harmful greenhouse gas emissions. The current high cost of fuel has helped to reduce the payback period for the cost of installing oxygen monitoring and air / fuel ratio control. It makes sense to consider the benefits of installing an oxygen system on your combustion process.

Accurate Measurement of the Carbon Potential in Furnaces used for Heat-Treating of Metal. Using an in-site probe to accurately measure the carbon potential in real-time means the correct level of carburizing is achieved first time every time, saving expensive re-work and increasing productivity. The Novatech 1734 controller works with a variety of gasses including; Propane, Methane, Nitrogen / Methanol

In-situ Water Vapour Analysis in High Humidity Applications. Moisture measurement improves product quality and consistency and reduces fuel costs for drying and baking processes. Novatech has enhanced its range of analysers by adding the 1735 Water Vapour Transmitter and the 1231HWV High Water Vapour Oxygen Probe.

Providing in-situ measurement of Oxygen and Dew Point in annealing and holding furnaces with protective atmospheres of hydrogen and nitrogen (H2Nx). The Novatech 1738 Dew Point Transmitter continuously monitors the dew point of annealing furnaces allowing operators to take corrective action to prevent expensive re-work due to oxidation or decarburization.

Leak detection system for industrial applications.

Advanced leak detection and monitoring system.

𝘌𝘭𝘦𝘤𝘵𝘳𝘰𝘋𝘺𝘯𝘢𝘮𝘪𝘤™ Broken Bag Detector. Controller based gross filter failure detector. Detects significant increases in particulate loading providing warnings of filter media degradation in baghouses and cartridge filters.

Leak detection and alert system for industrial monitoring.

Advanced leak detection system for critical applications.

High-performance leak detection and monitoring solution.

Industrial-grade leak detection system with advanced features.

Precision leak location and detection system.

QAL1 approved particulate monitoring system for emission control.

Particulate CEM for wet gas streams. QAL1 approved ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation plant. QAL1 certified against EN 15267-3 to meet EN 14181 and other International standards.

Advanced particulate monitoring system with QAL certification.

High-performance particulate emission monitoring system.

𝘌𝘭𝘦𝘤𝘵𝘳𝘰𝘋𝘺𝘯𝘢𝘮𝘪𝘤™ QAL1 Approved Particulate CEM. QAL1 approved particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters. The QAL 991 is an approved particulate CEM (Continuous Emission Monitor) designed to meet and exceed CEN standard EN 14181 / EN 13284-2. Particularly suited to monitoring emissions from industrial processes regulated under the European Waste Incineration Directive (WID) and Large Combustion Power Plant Directive (LCPD), the PCME QAL 991 is also proven in other industrial processes controlled with high efficiency bag filtration. The instrument holds QAL1 approval specified in EN 15267-3, under both MCERTS and TUV.

US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Utilising the patented ProScatter™ Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the STACK 181 very suitable for use as a PM CPMS or PM CEMS that need to comply with US EPA PS-11 for Site Operators looking to satisfy the recent MACT and MATS rules. The STACK 181 is suitable for measuring particle emissions after both bag filter and electrostatic precipitator arrestment plant.

Opacity QAL1 Approved Particulate CEM. QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional "mirror type" reflectors providing greater confidence in measurement.

𝘌𝘭𝘦𝘤𝘵𝘳𝘰𝘋𝘺𝘯𝘢𝘮𝘪𝘤™ Approved Particulate CEM. TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters.

Advanced particulate monitoring system for emission control applications.

MICRO-VENTURI FLUE GAS VELOCITY CEM. Flue gas flowmeter for continuous measurement of gas velocity, temperature and pressure in exhaust gas ducts (chimneys or flue pipes). Micro-Venturi technology. The StackFlow 100 is a compact flowmeter for continuous measurement of velocity, temperature and static pressure in exhaust gas ducts ( stacks or flue gas ducts) using the Micro-Venturi technology. From these measurements, StackFlow 100 allows to determine the flue gas volume flow rate via an additional calculation element which is either performed by an ENVEA controller or directly by the CEMS cabinet's data acquisition station. This data is used to calculate the mass flows of the pollutants released (dust, SO2, NOx…). Flow range : 3 – 30 m/s.

APPROVED FLUE GAS VELOCITY CEM FOR STACK VELOCITY, VOLUMETRIC FLOW AND POLLUTANT MASS RELEASE CALCULATIONS WHEN LINKED TO GAS AND DUST CEMS. Approved Flue Gas Velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS.

𝘍𝘭𝘶𝘦𝘚𝘰𝘯𝘪𝘤™ APPROVED FLUE GAS VELOCITY CEM. Approved flue gas velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS.

Optical viewing system for industrial monitoring applications.

Advanced optical monitoring system for emission control.

High-performance optical viewing system for industrial applications.

Professional-grade optical monitoring solution.

Advanced optical viewing and monitoring system.

Protea 2000 In-Situ Infra-red gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS). The Stack Mounted In-Situ analyser monitors the stack gas without the need for any sample handling equipment making it a cost effective solution to Continuous Emission Monitoring and Process applications. The analyser monitors the stack gases "wet", water vapour is continuously monitored enabling the pollutant gases can be reported on a wet or dry basis. Certification with environmental monitoring equipment standards is dependent on analyser series and application. Certification of models includes EN 15267-3 MCERTS; EN 14181 QAL 1 and US EPA 40cfr part 60 & 75. Certified for use in Hazardous Areas Option.