PCME
Explore PCME particulate monitoring and emission control systems and related product families available through Exact Analytical in Malaysia. Compare models, applications and technical documents with local consultation, integration and service support.
Exact Analytical is an appointed PCME distributor in Malaysia.
Product categories
Available product types
Air Quality Monitoring Systems.
𝘌𝘭𝘦𝘤𝘵𝘳𝘰𝘋𝘺𝘯𝘢𝘮𝘪𝘤™ Broken Bag Detector. Controller based gross filter failure detector. Detects significant increases in particulate loading providing warnings of filter media degradation in baghouses and cartridge filters.
Particulate CEM for wet gas streams. QAL1 approved ProScatter™ particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation plant. QAL1 certified against EN 15267-3 to meet EN 14181 and other International standards.
𝘌𝘭𝘦𝘤𝘵𝘳𝘰𝘋𝘺𝘯𝘢𝘮𝘪𝘤™ QAL1 Approved Particulate CEM. QAL1 approved particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters. The QAL 991 is an approved particulate CEM (Continuous Emission Monitor) designed to meet and exceed CEN standard EN 14181 / EN 13284-2. Particularly suited to monitoring emissions from industrial processes regulated under the European Waste Incineration Directive (WID) and Large Combustion Power Plant Directive (LCPD), the PCME QAL 991 is also proven in other industrial processes controlled with high efficiency bag filtration. The instrument holds QAL1 approval specified in EN 15267-3, under both MCERTS and TUV.
US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Utilising the patented ProScatter™ Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the STACK 181 very suitable for use as a PM CPMS or PM CEMS that need to comply with US EPA PS-11 for Site Operators looking to satisfy the recent MACT and MATS rules. The STACK 181 is suitable for measuring particle emissions after both bag filter and electrostatic precipitator arrestment plant.
Opacity QAL1 Approved Particulate CEM. QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional "mirror type" reflectors providing greater confidence in measurement.
MICRO-VENTURI FLUE GAS VELOCITY CEM. Flue gas flowmeter for continuous measurement of gas velocity, temperature and pressure in exhaust gas ducts (chimneys or flue pipes). Micro-Venturi technology. The StackFlow 100 is a compact flowmeter for continuous measurement of velocity, temperature and static pressure in exhaust gas ducts ( stacks or flue gas ducts) using the Micro-Venturi technology. From these measurements, StackFlow 100 allows to determine the flue gas volume flow rate via an additional calculation element which is either performed by an ENVEA controller or directly by the CEMS cabinet's data acquisition station. This data is used to calculate the mass flows of the pollutants released (dust, SO2, NOx…). Flow range : 3 – 30 m/s.
APPROVED FLUE GAS VELOCITY CEM FOR STACK VELOCITY, VOLUMETRIC FLOW AND POLLUTANT MASS RELEASE CALCULATIONS WHEN LINKED TO GAS AND DUST CEMS. Approved Flue Gas Velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS.
𝘍𝘭𝘶𝘦𝘚𝘰𝘯𝘪𝘤™ APPROVED FLUE GAS VELOCITY CEM. Approved flue gas velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS.
